INFORMATION REQUEST »
«BACK

BRACKETS

Ø45 series

INFORMATION REQUEST »
  • GUIDED MOTOR CHOICE
  • APPLICATION


    LIMIT SWITCH


    DIAMETER


    TYPE OF OPERATION


    PROGRAMMING MODE


  • Search fir CODE/NAME
INFORMATION REQUEST »
  • GUIDED MOTOR CHOICE
  • APPLICATION


    LIMIT SWITCH


    DIAMETER


    TYPE OF OPERATION


    PROGRAMMING MODE


  • Search fir CODE/NAME

« Series 35 Series 45 « Series 58

WAVE WIRE Ø45

ico-4b.jpgico-2b.jpg

Head in zama: 10 Nm - 15 Nm - 25 Nm - 32 Nm - 40 Nm - 50 Nm

ATTACHMENT WITHOUT BRACKETS
The motor head is made from high-performance metal and allows direct fastening to the awning brackets. The M6 threaded holes with a centre-to-centre distance of 48 mm give the possibility of adapting to any type of bracket commonly available on the market and facilitate the installation and assembly of the motor under any conditions.

COMPATIBLE BRACKETS
  • Up to 15 Nm

    A4506_0627
    Anti-vibration support with quick coupling For the models with head in plastic add plastic insert A4506_0613

  • Up to 32 Nm

    A4506_0556
    Flanged 10 mm square pin with omega bar, through holes
    Head in zama
  • A4506_0557
    Flanged 10 mm square pin with omega bar, M6 holes
    Head in zama
  • A4506_0558
    Adjustable bracket with 10 mm square hole
  • A4506_0561
    Bracket with 10 mm square hole, with release
  • A4506_0562
    Adjustable bracket with 10 mm square hole, with release
  • A4506_0566
    Flanged 10 mm square pin with omega bar, through holes
    Head in plastic
  • A4506_0567
    Flanged 10 mm square pin with omega bar, M6 holes
    Head in plastic
  • A4506_0569
    10 mm square pin with M6 screw
    Head in plastic
  • A4506_0572
    Bracket with 10 mm square hole, without release
  • A4506_0573
    Adjustable bracket with 10 mm square hole, without release
  • A4506_0580
    10 mm square pin with M6 screw
    Head in zama
  • A4506_0586
    Bracket for Coffrelite end cap
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0589
    Snap-on bracket
  • A4506_0591
    Steel plate & snap-on bracket
  • A4506_0596
    Fast coupling bracket in metal
    For the models with heads in plastic add plastic insert A4506_0611
  • A4506_0600
    Bracket with saddle square 10 mm
  • A4506_0601
    Screw-bolt bracket square 10 mm with unlock

  • All motor torques

    9014
    Flange
  • A4506_0554
    Fast coupling bracket with spring split pins
    Not for heads in resin
  • A4506_0555
    Universal bracket with fast coupling
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0559
    Vercelli support plate
  • A4506_0568
    Plate 100x100
  • A4506_0570
    Adjustable snap-on bracket
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0587
    Snap-on bracket with holder 'Demi linteau'
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0588
    Bracket Bloc-Baie
  • A4506_0612
    Fast coupling bracket - 'Wings'
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0614
    Fast coupling bracket on plate 100x100
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0615
    Fast coupling bracket on plate 80x80
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0616
    Square pin 10 mm
    Only for plastic head
  • A4506_0617
    Universal support with wiring
    For the models with heads in plastic add plastic insert A4506_0613
  • A4506_0618
    Inoutic side support
    For the models with heads in plastic add plastic insert A4506_0613

  • Only for plastic head

    A4506_0611
    Plastic insert for resin-head to metal bracket
  • A4506_0613
    Plastic insert to fast coupling bracket in zamak

«BACK