INFORMATION REQUEST »
IT  / EN / FR / DE/ ES / PT / RU / TR
WORK WITH US
«BACK
« BACK

MOTORS FOR ROLLING SHUTTERS

Activation by switch.
Electronic limit switch.

The Plug&Play motor with manual override.

  • GUIDED MOTOR CHOICE
  • APPLICATION


    LIMIT SWITCH


    DIAMETER


    TYPE OF OPERATION


    PROGRAMMING MODE


  • Search fir CODE/NAME
INFORMATION REQUEST »
  • GUIDED MOTOR CHOICE
  • APPLICATION


    LIMIT SWITCH


    DIAMETER


    TYPE OF OPERATION


    PROGRAMMING MODE


  • Search fir CODE/NAME
ico-1b.jpg
COMPATIBLE ADAPTERS » COMPATIBLE SUPPORTS » OTHER COMPATIBLE ACCESSORIES » ACCESSORIES FOR MANUAL OPERATION » DOWNLOAD BROCHURE »
Installation

For automatic adjustment of the limit switches lockers components are required.


«BACK

FOR ROLLING SHUTTERS

PLUG&PLAY OCEAN EASY Ø45

Electronic limit switch and override device
Suitable for installation on shutters with both hard hangers and stoppers on the last slat.

Compact override
Thanks to its small size, this device can be installed in limited spaces.
Reduction ratio 1:18.

Easy to install
Insert the motor into the tube, connect it to the power supply and it's ready
NO ADJUSTMENT REQUIRED.

Specific functions
  • Automatic adjustment of the limit switch.
  • After manual override, the end positions remain unchanged.
  • Protection against freezing and obstacle detection on both directions.
  • May be connected either directly or in parallel.



DATA SHEET »
DOWNLOAD BROCHURE »
MAIN CHARACTERISTICS
 
Code Head Torque Speed Certification
AEN45101700Zama10 Nm17 rpm
AEN45201700Zama20 Nm17 rpm
TECHNICAL FEATURES
 
 10/1720/17
Torque (Nm)1020
Speed (rpm)1717
Power (W)150170
Power supply (V/Hz)230/50230/50
Consumption (A)0,700,80
Cable 4x0,75 (m)lg. 14 cm (connector included)*lg. 14 cm (connector included)*
Operating time (min)44
Protection degreeIP44IP44
Weight (kg)3,453,45
L1 (mm)646646
*The cable is provided separately from the motor. Choose the suitable length for the cable:
A4503_0333 length 1 m
A4503_0311 length 2 m
A4503_0314 length 4 m
*The cable is provided separately from the motor. Choose the suitable length for
COMPATIBLE SYSTEMS
GIRO
One-channel remote control, for one receiver or one group of receivers.
GIRO Plus
Multi-channel remote control with 7 individual channels and one global channel.
GIRO WALL
One-channel wall-mounted remote control, for one receiver or one group of receivers.
POP
One-channel remote control, for one receiver or one group of receivers.
POP Plus
Multi-channel remote control with 7 individual channels and one global channel.
Skipper LCD
Multifunction 50-channel remote control with a 1,8" colour LCD display.
Skipper Senso
Remote control with integrated brightness and temperature sensor for indoor.
Goccia
Rain-sensor wired.
Bus Modules
Command and centralization modules for rolling shutters and awnings. Also with built-in radio receiver.
Domotic Transmitter
This interface allows to adapt the Cherubini radio systems to the home automation control unit.
Radio receivers for rolling shutters
The new generation radio receiver that gives added performance to wired motors.
«BACK