MOTORS FOR AWNINGS, PERGOLAS AND SCREENS

Wave RX

The motor for all awning types - Ideal for cassette awnings, pitched pergolas or horizontal awnings.

Activation by remote control or switch. Electronic limit switch.

Device suitable for Awnings, Screens, Pergolas

Equipped with the Cherubini remote control system

The motor for all awning types

MOTORS FOR AWNINGS, PERGOLAS AND SCREENS

Electronic limit switch with built-in receiver, wire and radio control

Attachment without brackets

Thanks to the metallic head, the motor can be fastened directly to the bracket.

Specific functions:

  • "Super-sensitivity" function on obstacle detection, set by remote control, setting on 3 levels possible (only for 10-15-25 Nm).
  • Obstacle detection up-wards, sensitivity setting on 3 levels possible.
  • Torque control for the stop in closing position of cassette awnings.
  • Possibility of memorising an intermediate position.
  • Setting possible with remote control or wired switch.

Cassette awnings

The possibility to adjust the applied force ensures the perfect closing of the cassette awnings, avoids the danger of over-stretching the awning fabric.

Pitched pergolas

On pitched pergolas the motor stops automatically when the fabric reaches its point of greatest extension: performing a remote control sequence is sufficient to program the limit switches. From that moment onwards each time the motor reaches the opening limit switch position, it stops so that it keeps the awning fabric taut.

Pergolas and horizontal awnings

For pergolas and horizontal awnings it is possible to activate the Fabric Tightening function: the motor, after reaching the outer limit, automatically performs a short backwards turn to tighten the fabric.

Wave RX Ø 45 4 rpm: the ideal for tilt slats pergolas

The “slow” version (4 rpm) was designed to automate tilt slats pergolas. The high-resolution electronic control of the revolutions enables fine tuning of the slats’ angular position ensuring precise light management. The electronic limit switch managed by the remote control makes the motor extremely flexible and adaptable to every situation.

Optional connections

Wired switch.
Connection to WindTec, Mistral and Rugiada climatic controls via radio.

Wave RX

Main characteristics

Code
{{ item["Codice"]}}
certification: {{itemKeyItem | translate }}

Technical features

Characteristics
{{prod.FeaturesProd.table_coppianm}}/{{prod.FeaturesProd.table_velocitarpm}} - {{prod.Codice}}

Academy Documentation

Perfect for fold-up or roll-up pergola shades; it is operated with via remote control or switch. Thanks to the metal head, the motor can be attached directly to the rod bracket.

WAVE RX - Pergolas
  • Electrical Connection
  • Before starting
  • Motor programming
  • Pairing the remote control with the motor
  • Setting the limit stop position
  • Anemometer, Storage of climate sensors
  • Intermediate position
  • Pairing additional remote controls
  • Complete deletion of remote controls
  • Complete deletion of limit positions
  • Closing force setting

METAHome: Inclusion of the Cherubini CRC RX motors in the META App

Perfect for awnings with or without cassette and fold-up or roll-up pergola shades; it is operated via remote control or switch. Thanks to the metal head, the motor can be attached directly to the bracket.

WAVE RX - Awnings
  • Electrical Connection
  • Before starting
  • Motor programming
  • Pairing the remote control with the motor
  • Setting the limit stop position
  • Anemometer, Storage of climate sensors
  • Intermediate position
  • Pairing additional remote controls
  • Complete deletion of remote controls
  • Complete deletion of limit positions
  • Closing force setting

METAHome: Inclusion of the Cherubini CRC RX motors in the META App

Filter by solution type



Filter by application





Reset filters

No products match your search